Frequent Questions
What is the Tuf-Barrier noise barrier wall?
The Tuf-Barrier is a vinyl noise barrier wall, sold in two different grades for different applications. The Light wall STC 25 Tuf-Barrier residential and commercial applications where AASHTO guidelines are not a factor and the Heavy Wall STC 32 Tuf-Barrier for heavy commercial, highway and high noise applications where AASHTO guidelines may play a role.
Where can I get the Tuf-Barrier?The Tuf-Barrier is usually sold and shipped direct from our facility near Buffalo.
What does the Tuf-Barrier cost?The Tuf-Barrier is priced by the lineal foot depending on height and color. In comparison to the most commonly used noise barrier materials the Tuf-Barrier is priced between lower cost wood and more expensive concrete barrier walls. In terms of cost of ownership, the Tuf-Barrier quickly becomes a cost effective replacement for wood noise barrier wall as the Tuf-Barrier does not require any ongoing maintenance or painting. While a wood sound barrier is subject to rot and wear with a limited life time.
What colors are available?We offer 5 standard colors with custom colors available for larger projects.
How much will the Tuf-Barrier reduce the noise.
The level of noise reduction for the Tuf-Barrier as with all noise barrier walls is subject to many factors. The terrain, type of noise and other localized conditions can greatly affect the noise reduction of a noise barrier wall. For specific situations you are advised to consult a sound engineering specialist to answer questions about noise reduction for your project. As a good rule of thumb, reductions of 5-10 decibels are reasonably attainable in most situations. More noise transmission loss may be possible through the correct height selection and placement of the noise barrier. Contact us to learn more.
How does the Tuf-Barrier compare ?
|
Vinyl |
Wood |
Concrete |
Projected Life |
Lifetime |
10-15 Years |
Lifetime |
Maintenance Free |
Yes |
No |
Yes |
Graffiti Resistant |
Yes |
No |
No |
Termite Free |
Yes |
No |
Yes |
Fungus & Dry Rot Free |
Yes |
No |
Yes |
Needs Painting |
No |
Regularly |
No |
Color Stable |
Yes |
No |
Yes |
Material Cost
Installation Cost |
Moderate
Low |
Low-Moderate
Low-Moderate |
High
High
|
How is the Tuf-Barrier installed?
The Tuf-Barrier at heights up to 10’ can be installed similar to standard fence by cementing our steel reinforced H-posts into the ground and placing the tongue and groove rails within- a fairly uncomplicated installation.
For heights above 10’ an I-beam post stiffener is used to provide added strength up to 20’ high. For this type of installation an engineer should be consulted to determine factors such as post depth, pour size, soil conditions etc.
Need other information?
Contact us and one of our representatives will answer any noise barrier wall questions you may have.
